Deploying a temporary Linux host<\/h2>\n\n\n\n
To gain access to your old root account, you will need to be able to boot a system to a command line. A common way to do this for Linux computers is to boot into the GRUB menu, but this might prove slightly difficult on cloud servers where you have no physical access to the system. Instead, you can take advantage of the virtual nature of the cloud environment and simply create a new server to mount the old disk device in.<\/p>\n\n\n\n
Start by logging into your UpCloud control panel and deploying a new server<\/a>.<\/p>\n\n\n\n <\/p>\n<\/li>\n\n\n\n The deployment process will only take a moment, but you do not have to wait for it to complete. Continue below with the next part.<\/p>\n\n\n\n In the meanwhile, as your new server is being deployed, shut down your old server at the control panel. If the server was installed using a custom system image, you may need to use the forced shutdown command.<\/p>\n\n\n\n With the server shut down, go to the Storage<\/em> tab in your server settings.<\/p>\n\n\n\n Make sure the storage device is named so that you will be able to recognise it later. You can rename the device by clicking the pencil<\/i> icon, entering a new name, then clicking the accept icon and afterwards the Save changes<\/em> button to confirm.<\/p>\n\n\n\n Then, free up the OS disk device from the host by clicking the Detach<\/em> button. If you have multiple disks, leave the other devices as they are. When attaching the OS disk again after the password reset, it will be set correctly as the first device.<\/p>\n\n\n\n Next, open the server settings of the temporary server and go to the Storage<\/em> tab there.<\/p>\n\n\n\n Click on the Add new device<\/em> button at the end of the storage list.<\/p>\n\n\n\n In the new storage device window, select Attach existing device<\/em>, then find the device you just detached in the Devices list<\/em>. Once you have selected the right disk, click the Add a storage device<\/em> button underneath to confirm.<\/p>\n\n\n\n When the disk has been attached successfully, boot up the server and log in over SSH with the root user of the temporary host.<\/p>\n\n\n\n When logged into the temporary server, check that you can see the old system disk.<\/p>\n\n\n\n The first device vda<\/em> in the above example is the system disk running the temporary server and the second vdb<\/em> is your original system device. To access the second storage, you will need to mount it in the running system.<\/p>\n\n\n\n Then change to the root environment of the original system.<\/p>\n\n\n\n You can now change the root password with the usual command. Enter the new password twice to confirm.<\/p>\n\n\n\n Once you have reset the password, exit the mounting system and shut down the temporary host so that you can return the old system disk where it belongs.<\/p>\n\n\n\n When the temporary server has been powered down, you can detach the system device original in the server settings and Storage tab as you did before. Then reattach it to its original host.<\/p>\n\n\n\n Then start the original server again.<\/p>\n\n\n\n You should now be able to log in using the root account with the password you just set and gain normal access to your server.<\/p>\n\n\n\n After confirming that the password was reset successfully, the temporary server and storage device can be deleted.<\/p>\n\n\n\n\n
shutdown -h 1<\/pre>\n
![\"Script](\"https:\/\/upcloud.com\/media\/shutdown-init-script.png\")
<\/figure>Moving the old system disk to the temporary host<\/h2>\n\n\n\n
We recommend taking a backup of your server before resetting the root password<\/a><\/h4>\n\n\n\n
![\"Rename](\"https:\/\/upcloud.com\/media\/rename-disk.png\")
<\/figure>\n\n\n\n![\"Detach](\"https:\/\/upcloud.com\/media\/detach-storage.png\")
<\/figure>\n\n\n\n![\"Attach](\"https:\/\/upcloud.com\/media\/attach-password-reset-device.png\")
<\/figure>\n\n\n\nResetting the root password<\/h2>\n\n\n\n
lsblk\n\nNAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT\nvda 253:0 0 25G 0 disk\n\u2514\u2500vda1 253:1 0 25G 0 part \/\nvdb 253:16 0 25G 0 disk\n\u2514\u2500vdb1 253:17 0 25G 0 part<\/pre>\n\n\n\n
mount \/dev\/vdb1 \/mnt<\/pre>\n\n\n\n
chroot \/mnt<\/pre>\n\n\n\n
passwd<\/pre>\n\n\n\n
exit\n\nshutdown -h now<\/pre>\n\n\n\n
Returning the system storage<\/h2>\n\n\n\n
![\"Storage](\"https:\/\/upcloud.com\/media\/reattached-original-server.png\")
<\/figure>\n\n\n\n![\"Delete](\"https:\/\/upcloud.com\/media\/delete-temporary-server.png\")
<\/figure>\n","protected":false},"featured_media":27304,"comment_status":"open","ping_status":"closed","template":"","community-category":[109,121],"class_list":["post-24472","tutorial","type-tutorial","status-publish","has-post-thumbnail","hentry","community-category-upcloud-services","community-category-security"],"acf":[],"_links":{"self":[{"href":"https:\/\/studiogo.tech\/upcloudold\/wp-json\/wp\/v2\/tutorial\/24472","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/studiogo.tech\/upcloudold\/wp-json\/wp\/v2\/tutorial"}],"about":[{"href":"https:\/\/studiogo.tech\/upcloudold\/wp-json\/wp\/v2\/types\/tutorial"}],"replies":[{"embeddable":true,"href":"https:\/\/studiogo.tech\/upcloudold\/wp-json\/wp\/v2\/comments?post=24472"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/studiogo.tech\/upcloudold\/wp-json\/wp\/v2\/media\/27304"}],"wp:attachment":[{"href":"https:\/\/studiogo.tech\/upcloudold\/wp-json\/wp\/v2\/media?parent=24472"}],"wp:term":[{"taxonomy":"community-category","embeddable":true,"href":"https:\/\/studiogo.tech\/upcloudold\/wp-json\/wp\/v2\/community-category?post=24472"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}